WTB go devel or mud frame [Archive] - United Waterfowlers Web Forums

View Full Version : WTB go devel or mud frame

Flyin by

10-17-2008, 09:32 AM

I am in the market for a frame for a go devel. I have the motor I just need the frame and drive shaft system.

FastDuck

10-17-2008, 01:31 PM

What brand motor is it? Vanguard, Kohler???

I am in the market for a frame for a go devel. I have the motor I just need the frame and drive shaft system.

Flyin by

10-20-2008, 07:22 AM

Its a Honda, from what measurements we have taken I believe it will bolt up to almost any of the go devel motor frames. If not we can fix that. Just need a frame to work with..Thanks

David B

10-20-2008, 07:26 AM

Check these guys out.

http://www.boghogmudmotors.com/

Flyin by

10-21-2008, 09:40 AM

Thanks cool web site, I wish I could find a used one to keep costs down. W ea are ok with the outboard but want to find new area to hunt and it hard to get to those places with out a mud machine.

Pitchin' In

10-21-2008, 10:07 PM

I will have a mud buddy frame available in approx. 2 weeks. I'm converting my long tail into a hyper....it's a 27 hp kohler...fresh water use only...good shape...

Flyin by

10-22-2008, 07:19 AM

PLease Im me or let me know what you want for it. Where are you located..

Pitchin' In

10-22-2008, 10:19 PM

$250....South Fl....or Sarasota....what ever is convenient....

FLA.MUDMAN

10-23-2008, 09:16 AM

Flyin by

10-23-2008, 08:11 PM

You Would Have To Redrill The Mounting Bolt Holes Rear And Bottom As They Have A Different Bolt Patern..and The Shaft Size Is Probley Different So A New U Joint Will Be Needed. Honda Has A Different Bolt Pattern Than B&s And Kohler........you Could Check With Beavertail.......i Have Bought A Dozen Or So From Them And They Work Fine....good Luck ... Safe Boating...

I think we have the ability to work with any frame, Beavertail sounds cool also is there a web site or contact number?
250 is right where we need to be also. LEt me know when your cutting it loose..

Flyin by

10-23-2008, 08:12 PM

$250....South Fl....or Sarasota....what ever is convenient....

This righ where I need to be I am in Sebastian and could do a road trip. LEt me know when your cutting it loose..Thanks Bill

duckmanJR

11-03-2008, 04:28 PM

So Bill,when you going to send your $25 to the PO box in Sebastian and be a member?...or you can "road trip" the three blocks to my house and just hand it to me! :)

David B

11-03-2008, 06:21 PM

Maybe someone could up the cost of the frame by $25.00:toothy10:

Flyin by

11-04-2008, 07:40 AM

So Bill,when you going to send your $25 to the PO box in Sebastian and be a member?...or you can "road trip" the three blocks to my house and just hand it to me! :)

I know I will do my part, I will have to send or whan I see you.

BlindHog

11-04-2008, 11:55 AM

In case anyone who reads this thread is in N Fl or Tallahassee, I have seen recent adds for two 9 HP Go Devil frames. One of them comes with a new Hondsa 8 HP that is not put on the old frame yet.

I know this is time of yr people get to looking....